Gear selector pt2

Once I was happy with the position the lateral support bars were welded to the tunnel frame and then painted with more of the POR15 paint system.

Ready to weld

Masked invader

Not the prettiest welding but it will do.

Painted and ready for final fitting

I decided to drill and tap to make it easier for fastening and less faffing if I have to adjust once the body is on from underneath.

There are nylocks on the underside of the bolts just as a locking nut but shouldn't really need it. 

Just need to sort out some convoluted tube and cable joints and then this is finished.